Apple Macintosh Performa 5400 Series - Manual (Page 13)

What’s next?
Congratulations! You’ve finished setting up your computer. Now continue
with one of the following steps:
m If you are new to the Macintosh, see the next section, “Learning the Basics.”
m If you are an experienced Macintosh user, turn to Chapter 2, “Getting
Help,” to learn about Macintosh Guide, your main source of information
when you’re working with the Macintosh.
m If you want to connect your computer to other equipment, such as a printer,
see Chapter 3, “Expanding Your Computer and Using Special Features.”
m If you want to install application software on your computer, see Chapter 4,
“Using Programs and Backing Up Disks” for information on setting up
your programs and managing memory. You’ll need this information to
properly set up any programs specifically designed for computers with
PowerPC™ microprocessors.
Before you begin working with your computer, be sure to read the important
health and safety information in Appendix A.
IMPORTANT If you need to turn off your computer at any point, please see
“Turning the Computer Off” later in this chapter. It is very important to use
the correct procedure for shutting down your Macintosh before turning it off.
12 Chapter 1
What you can’t find in this manual you
can find in Macintosh Guide, your main
source of information when you’re working
with your computer.