AEM Infinity Supported Applications - Ford Coyote Engine with Ford Racing Control Pack User Manual
Page 30

30
© 2014 AEM Performance Electronics
Infinity
Pin
Infinity Assignment
Pin
Destination
Ford Coyote with FR
Control Pack
Description
Infinity Hardware
Specification
Notes
C1-68
Analog_In_Temp_3
---
Oil Temperature Sensor
12 bit A/D, 2.49K pullup
to 5V
See 'Oil Temperature' Setup Wizard
f or selection.
C1-69
Stepper_2A
---
Stepper 2A
Automotiv e,
Programmable Stepper
Driv er, up to 28V and
±1.4A
Be sure that each internal coil of
the stepper motor is properly
paired with the 1A/1B and 2A/2B
ECU outputs. Supports Bi-Polar
stepper motors only . See Setup
Wizard page 'Idle – Show
Adv anced Setup' f or options.
C1-70
Stepper_1A
---
Stepper 1A
Automotiv e,
Programmable Stepper
Driv er, up to 28V and
±1.4A
Be sure that each internal coil of
the stepper motor is properly
paired with the 1A/1B and 2A/2B
ECU outputs. Supports Bi-Polar
stepper motors only . See Setup
Wizard page 'Idle – Show
Adv anced Setup' f or options.
C1-71
Stepper_2B
---
Stepper 2B
Automotiv e,
Programmable Stepper
Driv er, up to 28V and
±1.4A
Be sure that each internal coil of
the stepper motor is properly
paired with the 1A/1B and 2A/2B
ECU outputs. Supports Bi-Polar
stepper motors only . See Setup
Wizard page 'Idle – Show
Adv anced Setup' f or options.
C1-72
Stepper_1B
---
Stepper 1B
Automotiv e,
Programmable Stepper
Driv er, up to 28V and
±1.4A
Be sure that each internal coil of
the stepper motor is properly
paired with the 1A/1B and 2A/2B
ECU outputs. Supports Bi-Polar
stepper motors only . See Setup
Wizard page 'Idle – Show
Adv anced Setup' f or options.
C1-73
Power Ground
Ford Racing
PCM70-70
PWR Ground
Power Ground
Connect directly to battery ground.
C2-1
DBW2 Motor +
--
DBW Motor Control Open
5.0A max Throttle Control
Hbridge Driv e
+12V to open
C2-2
DBW2 Motor -
--
DBW Motor Control
Close
5.0A max Throttle Control
Hbridge Driv e
+12V to close
C2-3
Power Ground
--
Ground
Power Ground
Connect directly to battery ground.
C2-4
Injector 7
Engine
E-65
Fuel Injector Driv er 7
(INJ7)
Saturated or peak and
hold, 3A max continuous
Injector 7
C2-5
Injector 8
Engine
E-66
Fuel Injector Driv er 8
(INJ8)
Saturated or peak and
hold, 3A max continuous
Injector 8
C2-6
Injector 9
---
Injector 9
Saturated or peak and
hold, 3A max continuous
Injector 9