AEM Infinity Supported Applications - Ford Coyote Engine with Ford Racing Control Pack - Manual (Page 16)

16
© 2014 AEM Performance Electronics
Ford
Engine
Pin
Wire Color
Ford Coyote
with FR
Control Pack
Description
Infinity
Pin
Infinity
Assignment
Infinity Hardware
Specification
Notes
E-65 Grey /Brown
Fuel Injector
Driv er 7 (INJ7)
C2-4 Injector 7
Saturated or peak
and hold, 3A max
continuous
Injector 7
E-66 Violet/Orange
Fuel Injector
Driv er 8 (INJ8)
C2-5 Injector 8
Saturated or peak
and hold, 3A max
continuous
Injector 8
E-67 Blue/Green
Throttle
Actuator
Control Motor
(TACM-)
C1-53 DBW1 Motor -
5.0A max Throttle
Control Hbridge Driv e
+12V to close
E-68 Y ellow/Violet
Throttle
Actuator
Control
Motor(TACM+)
C1-54 DBW1 Motor +
5.0A max Throttle
Control Hbridge Driv e
+12V to open
E-69 Violet/Brown
Coil on Plug
Assembly 6
(COP6E)
C1-15 Coil 6
25 mA max source
current
0–5V Falling edge
f ire. DO NOT
connect directly to
coil primary . Must
use an ignitor OR
CDI that accepts a
FALLING edge f ire
signal.
E-70 White/Violet
Coil on Plug
Assembly 1
(COP1A)
C1-14 Coil 1
25 mA max source
current
0–5V Falling edge
f ire. DO NOT
connect directly to
coil primary . Must
use an ignitor OR
CDI that accepts a
FALLING edge f ire
signal.
* Denotes shared Infinity Pin Location
Ford
Racing
PCM70
Pin
Wire Color
Ford Coyote
with FR
Control Pack
Description
Infinity
Pin
Infinity
Assignment
Infinity Hardware
Specification
Notes
PCM70-01 --- --- --- Not used --- Not used Not used Not used
PCM70-02 Light Blue/Red
IAT Sensor
Ground
C1-19 AGND_1
Dedicated analog
ground
Analog 0–5V sensor
ground
PCM70-03 --- --- --- Not used --- Not used Not used Not used
PCM70-04 --- --- --- Not used --- Not used Not used Not used
PCM70-05 --- --- --- Not used --- Not used Not used Not used
PCM70-06 --- --- --- Not used --- Not used Not used Not used