AEM Infinity Supported Applications - Ford Coyote Engine with Ford Racing Control Pack - Manual (Page 18)

18
© 2014 AEM Performance Electronics
Ford
Racing
PCM70
Pin
Wire Color
Ford Coyote
with FR
Control Pack
Description
Infinity
Pin
Infinity
Assignment
Infinity Hardware
Specification
Notes
PCM70-26 --- --- --- Not used --- Not used Not used Not used
PCM70-27 --- --- --- Not used --- Not used Not used Not used
PCM70-28 Tan/Y ellow
DBW_APP1
[%]
C2-13 Analog_In_18
12 bit A/D, 100K
pullup to 5V
0–5V analog signal.
Use +5V Out pins as
power supply and
Sensor Ground pins
as the low ref erence.
Do not connect
signals ref erenced to
+12V as this can
permanently damage
the ECU.
PCM70-29 Light Blue/White
DBW_APP2
[%]
C2-14 Analog_In_19
12 bit A/D, 100K
pullup to 5V
0–5V analog signal.
Use +5V Out pins as
power supply and
Sensor Ground pins
as the low ref erence.
Do not connect
signals ref erenced to
+12V as this can
permanently damage
the ECU.
PCM70-30 --- --- --- Not used --- Not used Not used Not used
PCM70-31 --- --- --- Not used --- Not used Not used Not used
PCM70-32 --- --- --- Not used --- Not used Not used Not used
PCM70-33 --- --- --- Not used --- Not used Not used Not used
PCM70-34 --- --- --- Not used --- Not used Not used Not used
PCM70-35 --- --- --- Not used --- Not used Not used Not used
PCM70-36 --- --- --- Not used --- Not used Not used Not used
PCM70-37 --- --- --- Not used --- Not used Not used Not used
PCM70-38 Brown/Pink
PCM Relay
control
C1-29
+12V_Relay _Contro
l
0.7A max ground sink
f or external relay
control
Will activ ate at key
on and at key of f
according to the
conf iguration
settings.
PCM70-39 --- --- --- Not used --- Not used Not used Not used
PCM70-40 --- --- --- Not used --- Not used Not used Not used
PCM70-41 --- --- --- Not used --- Not used Not used Not used
PCM70-42 Red/Light Green
12V Start &
Run (ISP-R)
Blunt Lead
C1-65 +12V_SW 10K pulldown
Full time battery
power must be
av ailable at C1-10
bef ore this input is
triggered.
PCM70-43 --- --- --- Not used --- Not used Not used Not used