AEM Infinity Supported Applications - Ford Coyote Engine with Ford Racing Control Pack - Manual (Page 20)

20
© 2014 AEM Performance Electronics
Ford
Racing
PCM70
Pin
Wire Color
Ford Coyote
with FR
Control Pack
Description
Infinity
Pin
Infinity
Assignment
Infinity Hardware
Specification
Notes
PCM70-60* Grey
APP Sensor 1
& 2 Ground
APPVREF (1) &
(2) – Shared
with PCM70-44
C2-32 AGND_2
Dedicated analog
ground
Analog 0–5V sensor
ground
PCM70-61 Brown
APPVREF (2) C2-23 +5V_Out_2
Regulated, f used +5V
supply f or sensor
power
Analog sensor power
PCM70-62 Y ellow
KAPWR /
12VHAAT
C1-10 +12V_R8C_CPU
Dedicated power
management CPU
Full time battery
power. MUST be
powered bef ore the
ignition switch input is
triggered. (See C1-
65.)
PCM70-63 --- --- --- Not used --- Not used Not used Not used
PCM70-64 --- --- --- Not used --- Not used Not used Not used
PCM70-65 --- --- --- Not used --- Not used Not used Not used
PCM70-66 --- --- --- Not used --- Not used Not used Not used
PCM70-67 Grey /Orange
+12V In C1-64 +12V
12 v olt power f rom
relay
12 v olt power f rom
relay . Relay must be
controlled by +12V
Relay Control signal
pin C1-29 abov e.
PCM70-68 Grey /Orange
VPWR C2-9 +12V
12 v olt power f rom
relay
12 v olt power f rom
relay . Relay must be
controlled by +12V
Relay Control signal,
pin C1-29 abov e.
PCM70-69 Black
PWR Ground C1-60 Power Ground Power Ground
Connect directly to
battery ground.
PCM70-70 Black
PWR Ground C1-73 Power Ground Power Ground
Connect directly to
battery ground.
* Denotes shared Infinity Pin Location
Ford
Racing
PCM50
Pin
Wire Color
Ford Coyote
with FR
Control Pack
Description
Infinity
Pin
Infinity
Assignment
Infinity Hardware
Specification
Notes
PCM50-01 --- --- --- Not used --- Not used Not used Not used
PCM50-02 --- --- --- Not used --- Not used Not used Not used
PCM50-03 --- --- --- Not used --- Not used Not used Not used
PCM50-04 Brown/Pink
U02SN Bank 1 C1-7 UEGO 1 UN
Bosch UEGO
controller
Nernst Voltage
signal. Connect to pin
1 of Bosch UEGO
sensor.