AEM 30-3805 Universal V8 Core Harness User Manual

Page 25

Infinity Pin

Hrdwr Ref.

Hardware Specification

Notes

C1-13

Coil 2

25 mA max source current

0-5V Falling edge fire. DO NOT connect directly to
coil primary. Must use an ignitor OR CDI that
accepts a FALLING edge fire signal.

C1-14

Coil 1

25 mA max source current

0-5V Falling edge fire. DO NOT connect directly to
coil primary. Must use an ignitor OR CDI that
accepts a FALLING edge fire signal.

C1-15

Coil 6

25 mA max source current

0-5V Falling edge fire. DO NOT connect directly to
coil primary. Must use an ignitor OR CDI that
accepts a FALLING edge fire signal.

C1-16

Coil 5

25 mA max source current

0-5V Falling edge fire. DO NOT connect directly to
coil primary. Must use an ignitor OR CDI that
accepts a FALLING edge fire signal.

C1-17

LowsideSwitch_2

Lowside switch, 4A max, NO
internal flyback diode.

See Setup Wizard Pages "User GPOs" for activation
criteria and "LowSide Assignment Tables" for
output assignment

C1-18

LowsideSwitch_3

Lowside switch, 4A max with
internal flyback diode. Inductive
load should NOT have full time
power.

Normally used as MIL output. 'See Wizard page
"LowSide Assignment Tables" for output
assignment.

C1-19

AGND_1

Dedicated analog ground

Analog 0-5V sensor ground

C1-20

AGND_1

Dedicated analog ground

Analog 0-5V sensor ground

C1-21

Crankshaft Position
Sensor Hall