OR-Fab 89000 ORF PRODUCT DISPLAY RACK - Manual (Page 5)

5 DISPLAY RACK #89000
Step 8:
Use 2 kit 3/8”x 2 1/4” bolts, washers,
flange nuts and 2 kit 1” spacer tubes
(In-between legs) through both kit legs
(0-01) & (0-02) to assemble kit bottom
side plates onto the display
“A”-frame loosely.
(Reference arrows for placement.)
(Repeat steps to second brace.)
Step 9:
Locate two kit tray plates(0-09)
Step 7:
Locate both kit bottom brace plates
(0-06)
Step 10:
Use 4 kit 3/8”x 2” bolts, washers,
flange nuts and 2 kit 1” spacer tubes
(In-between legs) through both kit
legs (0-01) & (0-02) to assemble two
kit tray plates (0-09) onto the display
“A”-frame loosely.
(Reference arrows for placement.)
(Repeat steps to second tray.)