OR-Fab 89000 ORF PRODUCT DISPLAY RACK - Manual (Page 4)

4 DISPLAY RACK #89000
Step 4:
Repeat steps 1 - 3 to assemble
second “A”-frame assembly.
Step 5:
Stand both “A”-frame’s parallel to each
other with ORF facing outward and back
to back.
(Note: All kit 3/8” hardware should be
facing inward when installed.)
Step 6:
Locate both kit bottom tray plates
(0-10)
Align both “A”-frame assemblies with
both kit bottom tray plates(0-10)
aligned in between each “A”-frame
assembly.
Fasten lower assembly’s using existing
kit 3/8”x 2 1/4” bolts, washers & flange
nuts.(Note: Do not tighten
hardware.)
Repeat process until kit bottom tray
plates(0-10) are loosely fastened to
“A”-frame assembly.