OR-Fab 86300 PRE RUNNER TIRE CARRIER - ALL PICKUPS User Manual
Before starting installation
![background image](/manuals/545244/1/background.png)
3651 N. Hwy 89 • Chino Valley, AZ 86323
(928) 636-7080 • www.p-a-g.net
PRE-RUNNER TIRE CARRIER
INSTALLATION INSTRUCTIONS
ALL PICKUPS
KIT # 86300
WARNING
DO NOT install the tire carrier if the wheel offset is
greater than 8" or the “T” handle does not thread into
the tire carrier at least 1”.
WARNING
Always wear eye protection when operating power
tools.
WARNING
Use extreme caution when working near the fuel lines
and the fuel tank. A spark could cause an explosion or
fire resulting in serious personal injury and property
damage.
1
Pre-Runner Tire Carrier - Kit 86300
Before starting installation
1. Carefully read all warnings and instructions com-
pletely before beginning.
2. Verify all parts have been received in this kit by
checking the parts list at the end of this document.
3.
Only install this kit on the vehicle for which it is
specified. If anytime during the installation you
encounter something different from what is outlined
in the instructions, call technical support at (928)
636-7080.
NOTE
Kit parts are prefaced by the word kit and appear in
bold print.
NOTE
This tire carrier will accommodate wheels with an off-
set of about 8” or less as shown. Before installing the
tire carrier, measure the wheel offset to determine if
the tire carrier will accommodate the wheel.
Straightedge
Measure Here
3651 N. Hwy 89 • Chino Valley, AZ 86323
(928) 636-7080 • www.p-a-g.net