OR-Fab 89000 ORF PRODUCT DISPLAY RACK - Manual (Page 13)

13 DISPLAY RACK #89000
Step 3:
Locate JK Rear Bumper
Step 5:
Install one kit 1/2” and two kit 3/8” bolts,
nuts & washers through kit JK psg. rear
bumper mount plate(1-02) and JK rear
bumper; securing JK bumper on right side
of display rack, as shown in image.
(Reference arrows for placement.)
Step 4:
Install one kit 1/2” and two kit 3/8” bolts,
nuts & washers through kit JK dvr. rear
bumper mount plate(1-01) and JK rear
bumper; securing JK bumper on left side of
display rack, as shown in image.
(Reference arrows for placement.)
TJ Front Bumper Installation
Step 1:
Locate TJ Front Bumper Step 2:
Use two kit 5/16” bolts, washers(large), & flange nuts to
secure TJ front bumper onto the top display tray(0-09).
(Reference arrows for placement.)
(Repeat steps 1-2 to other side of display tray.)