OR-Fab 89000 ORF PRODUCT DISPLAY RACK - Manual (Page 15)

15 DISPLAY RACK #89000
Step 3:
Use four kit 5/16” bolts, washers & flange nuts to assemble two kit front bumper mount
plates (1-07 / 1-08) onto the kit lower display tray(0-09) as shown in images.
(Reference arrows for placement.)
Step 1:
Locate XJ Front Bumper and two kit front bumper mount plates(1-07 / 1-08)
XJ Front Bumper Installation
Step 4:
Locate XJ Front Bumper
Step 6:
Install two kit 716” bolts, nuts & washers
through kit XJ psg. front bumper mount
plate(1-08) and XJ front bumper; securing
XJ bumper on left side of display rack, as
shown in image.
(Reference arrows for placement.)
Step 5:
Install two kit 716” bolts, nuts & washers
through kit XJ dvr. front bumper mount
plate(1-07) and XJ front bumper; securing
XJ bumper on right side of display rack, as
shown in image.
(Reference arrows for placement.)
Step 2:
Use XJ front bumper instructions and hardware to complete the assembly of the XJ front
bumper before installing it onto the kit brackets as shown in images.