13 using your dcp with a macintosh, Using your dcp with a macintosh, G4, imac – Brother DCP-4020C User Manual
Page 179: Or ibook, With mac os 8.6-9.2 or, Mac os x 10.1/10.2.1 or greater -1, Setting up your usb equipped apple, Macintosh, G3, g4, imac
13 - 1 USING YOUR DCP WITH A MACINTOSH
®
13
Setting up your USB equipped Apple
®
Macintosh
®
G3, G4, iMac
™
or iBook
™
with Mac OS 8.6-9.2 or Mac OS X
10.1/10.2.1 or greater
The features supported by the DCP will depend on the operating
system you are using. The chart below shows which features are
supported.
*1 You need to download USB Mass Storage Support 1.3.5 from
Apple
®
Web site (www.apple.com).
*2 For Mac OS X 10.2 user, please upgrade to Mac OS X 10.2.1 or
greater. (The latest information for Mac OS X, please visit at:
http://solutions.brother.com)
Using your DCP with a
Macintosh
®
Before you can connect the DCP to your Macintosh
®
, you must
buy a USB cable that is not longer than 1.8 metres.
Do not connect the DCP to a USB port on a key board or a
non-powered USB hub.
Feature
MAC OS
MAC OS X
8.6
9.X
10.1
10.2.1 or
greater*
2
Printing
Yes
Yes
Yes
Yes
Scanning (TWAIN)
Yes
Yes
No
Yes
PhotoCapture Center
*
1
Yes
Yes
Yes