Using the scan key, Using the scan key -16 – Brother DCP-4020C User Manual
Page 115
9 - 16 HOW TO SCAN USING WINDOWS
®
Using the scan key
You can use the
Scan to
key on the control panel to scan originals
into your word processing, graphics or E-mail applications or your
computer folder. The advantage of using the
Scan to
key is that you
avoid the mouse clicks required to scan from your computer.
If you are using a Macintosh
®
computer the
Scan to
key will
work only for Scan to Card.
For Scan to E-mail, Scan to Image, Scan to OCR and Scan
to File only
Before you can use the
Scan to
key on the control panel, you
must have connected the DCP to your Windows
®
based
computer and loaded the appropriate Brother Drivers for your
version of Windows
®
.
When you are ready to use the
Scan to
key, make sure the
Brother Control Center application is running on your computer.
For details about how to configure the Brother Control Center
buttons to launch the application of your choice using the
Scan to
key, go to the appropriate chapter:
■
For Windows
®
98/98SE/Me and 2000 Professional, see
Using the Brother Control Center for Windows
98SE/Me/2000 Professional on page 10-1.
■
For Windows
®