beautypg.com

Service mode, Reset lamp runtime, Lamp run time history – Barco R9001190 User Manual

Page 41: Lamp drive mode

background image

9-4

Service Mode

5975398 BARCODATA 3200 110797

Select with or

then

to return.

Select with or

then

to return.

Reset Lamp Runtime

Reset lamp run time is only allowed when a new lamp is installed.

Highlight Reset Lamp Run Time by pushing the control disk up or up

and press ENTER to select.

When Reset Lamp Run Time is selected in the Service Mode selection

menu, the following warning will be displayed :

Risk of electrical shock. Reset lamp run time is reserved to qualified

service personnel.

If you are not qualified, press EXIT to cancel the reset operation.

SERVICE

IDENTIFICATION

CHANGE PASSWORD

CHANGE LANGUAGE

RESET LAMP RUNTIME

LAMP RUNTINE HISTORY

LAMP DRIVE MODE

MORE

WARNING

-----------------------------------------------------

RISK OF

ELECTRICAL SHOCK

______________________________________________________________

RESET LAMP RUN TIME

is reserved to

qualified

service personnel

to accept

to return.

Lamp Run Time History

To get an overview of the different lamp run times, highlight Lamp Run

Time History by pushing the control disk up or up and press ENTER.

A listing with the lamp serial number and the corresponding run time

will be displayed.

The actual installed lamp will be marked.

Press EXIT to return to the service mode selection menu.

SERVICE

IDENTIFICATION

CHANGE PASSWORD

CHANGE LANGUAGE

RESET LAMP RUNTIME

LAMP RUNTINE HISTORY

LAMP DRIVE MODE

MORE...

LAMP RUNTIME HISTORY

Serial No

Runtime

-----------------------------------------------------

>

0111121

600 h

0110031

750 h

0110010

745 h

-----------------------------------------------------

to return

Lamp Drive Mode

Highlight Lamp Drive Mode by pushing the control disk up or up and

press ENTER to toggle between [NORMAL] and [TEMPORARY

BOOST].

[NORMAL] : lamp is driven with a power of 575W.

[TEMPORARY BOOST] : lamp is driven with a power of 700W

When switching off, the lamp drive mode will be set to 'NORMAL'.

The projector always starts in the normal drive mode.

Select with or

then

to return.

SERVICE

IDENTIFICATION

CHANGE PASSWORD

CHANGE LANGUAGE

CHANGE PROJ. ADDRESS

CHANGE BAUDRATE PC

RESET LAMP RUNTIME

LAMP RUNTINE HISTORY

LAMP DRIVE MODE

MORE...