Barco R9001190 - Manual (Page 22)

5-3
Controlling
5975398 BARCODATA 3200 110797
Volume Control
Volume control adjusts the volume.
Use the + button for a higher volume.
Use the - button for a lower volume.
Bass Control
Bass control adjusts the bass level (low tones).
Use the + button for more low tones.
Use the - button for less low tones.
Treble Control
Treble control adjusts the treble level (high tones).
Use the + button for more high tones.
Use the - button for less hight tones.
Balance Control
Is only effective if a external amplifier with loudspeakers is connected
to the audio output.
The balance control adjust the sound level between the left and the
right box.
Use the + button for a higher sound level on the right box than on the
left one.
Use the - button for a higher sound level on the left box than on the
right one.
The Pause key.
When the Pause key is pressed, the image projection is stopped but
the projector remains with full power for immediate restart. The
sound is not interrupted.
The display on front of the projector will show a "P".
To restart the image :
- press pause key,
- press exit key or
- select a source number.