Barco R9001190 - Manual (Page 40)

9-3
Service Mode
5975398 BARCODATA 3200 110797
Select with or
then
to return.
Select with or
then
to return.
Change Password
This item is password protected when the password strap is
installed.
How to enable or disable the password function ?
The password function is enabled when the password strap on the
controller module is installed.
To change the setting of the password strap, consult a qualified
service technician or an authorised BARCO service center.
How to change the password ?
Highlight Change password by pushing the control disk up or up and
press ENTER to display the Change Password menu.
The old password is displayed and can be changed by entering the
digit with the numeric keys of the RCU or local keypath.
Press ENTER to save the new entered password.
Press EXIT if no changes have to be made.
ENTER displays the Change Password menu
EXIT returns to the adjustment selection menu.
ADJUST returns to operational mode.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
LAMP DRIVE MODE
MORE...
CHANGE PASSWORD
Enter new password
0000
Select with or
then
to return.
Change Language
Highlight Language by pushing the control disk up or up and press
ENTER to select the Language Selection menu.
Available languages : English.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
LAMP DRIVE MODE
MORE...
CHANGE LANGUAGE
English
Select with or
then
to return.