Security, Device security, Define security settings – Nokia E62 User Manual

Page 81: Change the restriction password, Fixed dialing

12.

Security

Device security

Select

Settings

Configuration

Security

Phone and SmartChip

You can modify the security settings for the PIN code, automatic lock, and SmartChip change, and change codes and passwords.
Avoid using codes that are similar to emergency numbers to prevent accidental dialing of the emergency number.
Codes are shown as asterisks. When you change a code, enter the current code, then the new code twice.

Define security settings

To define device and SmartChip settings, select a setting and

Options

Change

When calls are limited to closed user groups, calls may be possible to the official emergency number programmed into your

device.
Define the following settings:
•

PIN code request

— Select

to request that the PIN code is entered each time the device is switched on. This setting cannot

be changed if the device is switched off. Some SmartChips do not allow turning off the PIN code request.

•

PIN code

— Change the PIN code. The PIN code must be 4 to 8 numbers long. The PIN code protects your SmartChip against

unauthorized use and is provided with the SmartChip. After three consecutive incorrect PIN code entries, the PIN code is

blocked, and you need to use the PUK code to unblock it before you can use the SmartChip again. If you did not receive the

PIN code with the SmartChip, or if you require a PUK code, contact your service provider.

•

PIN2 code

— Change the PIN2 code. The PIN2 code must be 4 to 8 numbers long. The PIN2 code is required to access some

functions of the device and is provided with the SmartChip. After three consecutive incorrect PIN2 code entries, the PIN2 code

is blocked, and you need to use the PUK2 code to unblock it before you can use the SmartChip again. If you did not receive

the PIN2 code with the SmartChip, or if you require a PUK2 code, contact your service provider.

•

Autolock period

— Set a time-out after which the device is automatically locked and can be used only if the correct lock code

is entered. Enter a number for the time-out in minutes, or select

None

to turn off the autolock period. When the device is

locked, you can still answer incoming calls and calls may still be possible to the official emergency number programmed into

your device.

•

Lock code

— Change the lock code. The new code can be 4-256 characters long. Numeric and uppercase and lowercase

alphabetic characters can be used. The device notifies you if the lock code is not properly formatted. The device remembers

the previously used lock codes and prevents you from using the same lock code several times. The preset code is 12345. To

avoid unauthorized use of your device, change the lock code. Keep the new code secret and in a safe place separate from

your device.

•

Lock if SChip changed

— Set the device to ask for the lock code when an unknown, new SmartChip is inserted into your device.

The device maintains a list of SmartChips that are recognized as the owner’s cards.

•

Allow remote lock

— If you set this option on, you can lock the device by sending a predefined text message from another

phone. When you set this option on, you need to enter the remote lock message and confirm the message. The message

must be at least 5 characters long.

•

Closed user group

(network service) — Specify a group of people to whom you can call and who can call you.

•

Confirm SChip services

(network service) — Set the device to display confirmation messages when you are using a SmartChip

service.

Change the restriction password

To change the password used for restricting voice and data calls, select

Settings

Configuration

Call restriction

Cellular call restriction

Options

Edit restr. password

. Enter the current code, then the new code twice. The restriction password

must be four digits long. For details, contact your service provider.

Fixed dialing

When fixed dialing is activated, calls may be possible to the official emergency number programmed into your device.
Select

Address Book

Options

SmartChip contacts

Fixed dialing contacts

With the fixed dialing service, you can restrict calls from your device to only certain phone numbers. Not all SmartChips support

the fixed dialing service. Contact your service provider for more information.
Select

Options

, and select from the following options:

•

Activ. fixed dialing

— Restrict calls from your device. To cancel the service, select

Deact. fixed dialing

. You need your PIN2

code to activate and deactivate fixed dialing or edit your fixed dialing contacts. Contact your service provider if you do not

have the code.