Connection manager, View and end active connections, Modem – Nokia E62 User Manual

Page 65: Device management, Server profile settings

You can use the

Data transfer

without installing the USB data cable drivers.

Select

Settings

Data cbl.

Using a USB data cable, you can connect your device to a compatible PC. Connect the USB data cable to the bottom of the device.

To change the device type you normally connect to your device with the data cable, press the joystick.
Select from the following:
•

Ask on connection

— Select whether you want to be asked for the device type every time you connect the data cable to your

device.

•

PC Suite

— Connect the PC Suite to your device with the data cable, and use your device as a modem.

•

Data transfer

— Access and transfer data such as music or image files from your computer using the data cable connection.

To use the

Data transfer

mode, make sure that you have not selected USB as a connection type in the Manage connections

settings in Nokia PC Suite. Insert a memory card to your device, connect the device to a compatible computer with the USB

data cable, and select

Data transfer

when the device asks which mode is used. In this mode, your device acts as a mass storage

device and you can see it as a removable hard drive in your computer. The device will switch into the

Offline

profile if this is

selected. End the connection from the PC (for example, from an Unplug or Eject Hardware wizard in Windows) to avoid

damaging the memory card. After you end the connection, the device returns to the profile in which it was before using the

data transfer mode.

To save your selection, select

Back

Connection manager

Select

Settings

Conn. mgr.

To view the status of data connections or end connections, select

Act. data conn.

View and end active connections

Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding

off for billing, and so forth.

In the active connections view, you can see the open data connections: data calls and packet data connections.
To view detailed information about network connections, select the connection from the list and

Options

Details

. The type of

information shown depends on the connection type.
To end a network connection, select the connection from the list and

Options

Disconnect

To end all active network connections simultaneously, select

Options

Disconnect all

To view the details of a network, press the joystick.

Modem

Select

Settings

Modem

Together with a compatible computer, you can use your device as a modem to connect to the Web.
Before you can use your device as a modem
• You must subscribe to the appropriate network services from your service provider or Internet service provider.
• You need a compatible computer with a USB data cable, Bluetooth, or infrared connectivity.
• You must have Nokia PC Suite installed on your computer.
• You must have the appropriate drivers installed on your computer. You may need to install or update drivers for your cable,

Bluetooth, or infrared connection. After you have installed Nokia PC Suite, follow the instructions on the computer display to

install the drivers and connect your device to the computer.

After you have installed Nokia PC Suite and the appropriate drivers, start Nokia PC Suite on your computer. Select Connect to the

Internet, and follow the instructions on the computer display.
You may not be able to use some of the other communication features when the device is used as a modem.

Device management

Manage data and software on your device.

Server profile settings

Select

Settings

Dev. mgr.

To create a server profile, select

Options

New server profile

and select from the following options:

•

Server name

— Enter a name for the configuration server.

C o n n e c t i v i t y