Make calls, Touch dial, Vanity dial – Nokia E62 User Manual
Page 24
3.
Make calls
When the device is locked, calls still may be possible to the official emergency number programmed into your device.
In the offline profile, you may need to enter the lock code and change the device to a calling profile before making any call,
including a call to an emergency number.
To make and receive calls, the device must be switched on and have a valid SmartChip installed, and you must be located in a
service area of the cellular network. The GPRS connection is put on hold during voice calls unless the network supports dual
transfer mode.
Enter the phone number, including the area code, and press the call key. If you enter an incorrect character, press the backspace
key. You may begin dialing a number from the active idle mode, as shown in the picture.
1 — Dialing display
Tip: For international calls, press + , and enter the country code, area code (omit the leading 0, if necessary), and phone
number.
To end the call or cancel the call attempt, press the end key.
To make a call using
Address Book
, select
Address Book
in the idle mode. Enter the first letters of the name, scroll to the name,
Press the call key to view up to 20 numbers that you last called or attempted to call. Scroll to the desired number or name, and
press the call key to dial the number.
To adjust the volume of an active call, press the volume keys.
To call your voice mailbox (network service) in idle mode, press and hold 1, or press 1 then the call key.
1-touch dial
1-touch dialing allows you to make a call by pressing and holding a number key.
Before using 1-touch dialing, select
Menu
>
Settings
>
Configuration
>
Call
>
1-touch dialing
>
On
.
To assign a number key to a phone number, select
Menu
>
Settings
>
1-touch dial
. Scroll to the number key (2 - 9) on the screen,
and select
Options
>
Assign
. Select the desired number from the
Address Book
directory.
To delete the phone number assigned to a number key, scroll to the speed dialing key, and select
Options
>
Remove
.
To modify a phone number assigned to a number key, scroll to the 1-touch dialing key, and select
Options
>
Change
.
Vanity dial
Vanity dialing allows you to substitute letters with numbers. The letters are used in conjunction with numbers to place a call.
An example is 1-800-XXXXXXX.
Both alphabetic letters and numbers are available after the first number is entered.
1. Dial the numeric characters that begin the number.
2. Dial the alphabetic characters of the number.
To dial an alphabetic character, press and hold the chr key, then the alphabetic key.
When you dial a number in vanity dialing mode, both numbers and alphabetic characters will be displayed, as you dial them.
In
Address Book
and call log, numbers will appear numeric only, even they were created using the vanity dialing feature.
To enter data during an active call, press the number keys to enter numbers. To enter alphabetic characters, press and hold the
chr key then the alphabetic key, for each letter.
Copyright © 2006 Nokia. All Rights Reserved.
23