Toshiba ZL2 User Manual
Page 98
98
PROBLEM SOLVING
En
glis
h
Other problems
If your TV’s problem is not addressed in this Questions and
Answers section or the recommended solution has not
worked, do one of the following:
1
Turn off your TV. After 30 seconds, turn it on.
2
Turn off the TV and unplug the power cord. After
1 minute, plug the power cord in and turn on the TV.
3
Perform the Reset Factory Defaults procedure (see
page 85).
Q
Why don’t the networked devices work?
A
The LAN cables are not connected properly or at all.
Connect all cables (see page 14).
Check the settings under the Network Setup menu
(see page 47).
Q
Why doesn’t the Media Player feature operate?
A
Make sure that devices are connected correctly.
Incorrect behaviour may occur with a USB Hub
connection.
Check your network setup if using DLNA CERTIFIED™
Server.
Q
Why are not 3D images displayed?
A
Press 3D on the remote control and select 3D.
Check 3D Auto Start in 3D Setup menu (see
page 32).
Q
Why doesn’t the USB HDD work?
A
Register your USB HDD.
Use the USB 2 port to connect the USB HDD.
Your country/area may not support the USB HDD
function.
Q
What do the LEDs on the front of the television
indicate?
A
Check the table below.
LED 2
LED 1
LED indication
Condition
Solution
LED-1
LED-2
Green
Orange
Power ON
Programme Timer is set
Both Programme Timer
(Recording) and Recording are
NOT working
–
Green
Red
Power ON
Programme Timer (Recording)
or Recording is working
–
Green
OFF
Power ON
Programme Timer is NOT set
Both Programme Timer
(Recording) and Recording are
NOT working
–
Red
Orange
Power OFF (Standby)
Programme Timer is set
Both Programme Timer
(Recording) and Recording are
NOT working
–
Red
Red
Power OFF (Standby)
Programme Timer (Recording)
or Recording is working
–
Red
OFF
Power OFF (Standby)
Programme Timer is NOT set
Both Programme Timer
(Recording) and Recording are
NOT working
–
OFF
Green
(Blinks)
Abnormal operation of BUS
line.
Turn OFF the TV
and unplug the
power cord. Plug
the power cord in
again and turn ON
the TV.
Red
(Blinks)
OFF
Abnormal operation of WDT.
Green
(Blinks)
OFF
Fan stopped.
(if applicable)
Orange
Green
For Service
SW Upgrade in Progress
–
Red
OFF
For Service
SW Upgrade Failed
–
Green
OFF
For Service
SW Upgrade Successful
–
LED indication
Condition
Solution
LED-1
LED-2