Toshiba ZL2 - Manual (Page 42)

42
CONTROLS AND FEATURES
En
glis
h
This feature is to set the range of the adjustment of movement in
the double-scan processing. If you feel uncomfortable in motion
picture, select Standard.
a
In the Advanced Picture Settings menu, press
B
or
b to select Motion Detection Range.
b
Press
C
or
c
to select Wide or Standard.
Wide—Double-scan effect for higher-speed motion
picture
Standard—Stabilized double-scan effect
NOTE: When Active Vision M800 is set to Off, this feature will
be grayed out.
This feature will reduce 3D images blur without adding flicker.
a
In the Advanced Picture Settings menu, press
B
or
b to elect 3D Judder Cancellation.
b
Press C or c to select Auto or Off.
NOTE: When Picture Mode is set to Game, this feature will be
grayed out and automatically set to Off.
This feature allows you to reset the current Advanced Picture
Settings to the default values.
a
In the Advanced Picture Settings menu, press B or
b
to select Reset.
b
Press OK.
This feature is available when the Picture Mode option is
Standard, Hollywood Day, Hollywood Night, and
Hollywood Pro.
Test Pattern
When the test pattern is on screen, you can navigate in the
Picture submenus and adjust picture settings without
removing the image.
When you move to a non-Picture menu, or close the menus,
regular video will be restored.
a
In the Picture menu, press
B
or
b
to select Expert
Picture Settings and press OK to display Expert
Picture Settings menu.
b
Press B or b to select Test Pattern.
c
Press C or c to select On.
d
Press EXIT to close.
RGB Filter
This feature individually enables or disables the red, green,
and blue components of the picture to allow for more
accurate adjustment of each colour.
a
In the Expert Picture Settings menu, press B or b to
select RGB Filter and press OK.
b
Press
B
or
b
to select Red, Green or Blue to adjust.
c
Press
C
or
c
to select On.
d
Press B or b to select Colour or Tint and press C or
c
to adjust.
e
Press EXIT.
NOTE: It is not possible to turn off all three colours
simultaneously.
Colour Decoding
If you view DVDs with this TV, the Colour Decoding option
may be set to ensure the colourimetry reproduction.
NOTE: The modes excluding Auto (BT601 and BT709) are to
convert an irregular signal output from the DVD etc. with
incorrect colour to the optimum state. If BT601 or BT709 is
selected with a normal signal received, the colour may not be
correctly displayed. This feature should normally be set to
Auto.
a
In the Expert Picture Settings menu, press
B
or
b
to
select Colour Decoding.
b
Press
C
or
c
to select Auto, BT601 or BT709.
White Balance-Window Display
This feature displays a special Window Pattern to be used
when adjusting white balance with a measuring device.
a
In the Expert Picture Settings menu, press B or b to
select White Balance and press OK.
b
Press B or b to select Window Display and press C
or c to select On.
c
Press EXIT to close.
White Balance-Setting Type
You can choose from two types of White Balance adjustment.
a
In the Expert Picture Settings menu, press B or b
to select White Balance and press OK.
b
Press B or b to select Setting Type and press C or c
to select 2P or 10P.
Motion Detection Range
3D Judder Cancellation
Resetting the advanced picture settings
Expert Picture Settings