Toshiba ZL2 - Manual (Page 10)

10
En
glis
h
CONNECTING YOUR TV
Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch,
remove the mains plug from the wall socket.
Aerial cables:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the aerial to the socket on the rear of the television.
If you use a decoder and/or a media recorder, it is essential
that the aerial cable is connected through the decoder and/or
through the media recorder to the television.
Satellite cable: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the LNB from the satellite dish to the SATELLITE
ANTENNA socket on the TV. You can receive TV, radio,
interactive TV, and HD TV with clear reception.
SCART leads: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the media recorder IN/OUT socket to the television.
Connect the decoder TV socket to the television.
Before running Auto Tuning, put your decoder and media
recorder to Standby.
The Digital Audio Output socket enables the connection of a
suitable surround sound system.
NOTE: This output is always active.
HDMI® (High-Definition Multimedia Interface) is for use with a
DVD decoder or electrical equipment with digital audio and
video output. For acceptable video or PC signal formats
through the HDMI terminals, see page 102.
NOTE: Although this television is able to connect to HDMI
equipment, it is possible that some equipment may not
operate correctly.
LAN port is used to connect the TV to your home network.
This TV can play digital content stored on a DLNA CERTIFIED™
product with server function.
A wide variety of external equipment can be connected to
the back of the television; therefore, the relevant owner’s
manuals for all additional equipment must be referred to
for exact instructions.
If the television automatically switches over to monitor
external equipment, return to normal television by pressing
the desired programme position button. To recall external
equipment, press
o to select between DTV, EXT 1, EXT 2,
EXT 3, HDMI 1, HDMI 2, HDMI 3, HDMI 4, PC or ATV.
When the external input mode is selected while viewing DTV
mode, the SCART socket does not output video/audio signals.
4 (MHL)
Cable clamps
RGB/PC INPUT
EXT 1
*
HEADPHONE jack
LAN port
HDMI 1/2/3/4 INPUTS
HDMI 4 is compatible
with MHL 1
COMPONENT VIDEO INPUT
(EXT 2)
* When using the COMPONENT VIDEO INPUT (EXT 2), also connect the
AV Adaptor cable ② (RED and WHITE plugs) as Audio cables to the
VIDEO/AUDIO INPUT (EXT 3). EXT 3 Audio is shared.
VIDEO/AUDIO INPUT (EXT 3)
DIGITAL AUDIO
OUTPUT (OPTICAL)
Satellite dish
Media Recorder
Aerial Cable
“F-type”