Toshiba ZL2 - Manual (Page 47)

47
CONTROLS AND FEATURES
Engl
ish Setting up the Network
You can select the Network Type.
a
Press MENU /
C c
to highlight Setup icon.
b
Press
B
/
C c
to highlight Preferences icon and
press OK.
c
Press
B
or
b
to select Network Setup and press OK.
d
Press
B
or
b
to select Network Type and press
C
or
c to select Wired or Wireless.
e
If you selected Wired, see “Advanced Network Setup”
on page 49.
NOTE: Continued connection of AP (Access Point) is not
guaranteed. The connection may be disconnected while
watching TV.
There are 3 methods for Wireless Setup:
Easy Setup (WPS)
If the AP supports WPS, this method can be used.
• WPS is an industry standard designed to make connection
of wireless LAN equipment and security setup easy. WPS
will automatically configure all wireless settings.
NOTE: WEP encryption may not be able to configured by easy
setup.
Assisted Setup (setup by using the AP’s notification
information)
Network Name, Authentication, and Encryption are decided
based on information from the AP. You will manually set the
Security Key.
Manual Setup (manual input of all settings)
Easy Setup using PBC (Push Button Configuration)
a
In the Preferences menu, press B or b to select
Network Setup and press OK.
b
Press
B
or
b
to select Wireless Setup and press OK.
c
Press B or b to select Easy Setup and press OK.
d
Press
C
or
c
to select PBC.
e
Press b to highlight Start Scan and press OK.
f
Following the on-screen instructions, push the
appropriate button on your AP.
g
When a window reporting that the setup is complete
appears, press OK.
To cancel searching for the AP:
Press BACK while searching for the AP. A message will
appear, and then press
C or c to select Yes and press
OK .
Easy Setup using PIN (Personal Identification
Number)
a
In the Preferences menu, press B or b to select
Network Setup and press OK.
b
Press B or b to select Wireless Setup and press OK.
c
Press B or b to select Easy Setup and press OK.
d
Press
C
or
c
to select PIN.
e
Press
b
to select Start Scan and press OK.
f
Press
B
or
b
to select the desired AP and press OK.
NOTE: Check the Network Name and/or MAC address
on the label of the AP or in the manual, and select
your AP.
g
When the PIN code window appears, enter the
displayed PIN into your AP, and then press Next to
continue the PIN Setup. When a message displays to
report that the setup is complete, press OK.
Wireless Setup
Preferences
Personal TV Setup
REGZA-LINK Setup
MHL Setup
Recording Setup
3D Setup
Network Setup
Photo Frame Setup
Network Device Setup
Network Type Wired
Network Connection Test
Advanced Network Setup
Network Setup
Wireless Setup
Easy Setup On
Enhanced 11n Off
Manual Setup
Wireless Setup
Assisted Setup