Toshiba ZL2 - Manual (Page 19)

19
SETTING UP YOUR TV
Engl
ish e
When Ant/Cable/Satellite is set to Cable, the
following setting options will be provided in the Auto
Tuning screen.
Press
B
or
b
to select an item and press
C
or
c
to
select your desired option.
With the exception of DTV Scan Type and DTV Modulation
items, all of the following items will have 2 operating modes.
The first is Auto where the values for each item are preset by
the system. The second is an Input mode where you will be
able to enter a single value in place of the pre-set value. If no
channel is currently tuned and the Input state is chosen, a
system default value will be shown. However, if a channel is
currently tuned when the item is accessed, the value of the
current channel will be displayed.
DTV Scan Type:
This item determines whether a Quick Scan or a Full Scan will
be executed.
The Quick Scan is a simplified version of the Full Scan that is
designed to complete in less time.
DTV Start Frequency:
This sets the frequency from which the scan will begin.
DTV End Frequency:
This sets the frequency at which the scan will end.
DTV Modulation:
You can choose from five QAM modulation settings.
DTV Symbol Rate:
This is the baud rate (KS/s) of the scan.
DTV Network ID:
This is the Network ID to be utilized for the scan. This item is
grayed out when DTV Scan Type is set to “Full Scan”.
From the System Setup menu, you can add the satellites that you
wish to tune and configure detailed settings for each one
individually.
To add a satellite:
a
Press MENU / C c to highlight Setup icon.
b
Press
B
/
C c
to highlight System Setup icon.
c
Press OK to display System Setup menu.
d
Press
B
or
b
to select Satellite Settings and press
OK.
e
Press
b
to highlight a new line to add an another
satellite and press OK.
f
Press
b
until the required satellite is displayed and
press OK.
To delete a satellite:
a
In the Satellite Settings menu, press B or b to select
the satellite you want to delete.
b
Press the RED button. A confirmation window will
appear.
c
Press
C
or
c
to select Yes and press OK.
NOTE: It is not possible to delete position No.1.
Auto Tuning
DTV and ATV Tuning Mode
DTV
Quick Scan Scan Type
Auto Start Frequency
Auto End Frequency
Auto Modulation
Auto Symbol Rate
Auto Network ID
Start Scan
Satellite Settings
Satellite No. Dish LNB
ASTRA 19.2˚E
Satellite Settings
1
4
3
2
1 1
Transponder : 1/83 (10743 MHz)
Dish Type : Fixed
Lower LOF (MHz) : 9600
Upper LOF (MHz) : 10600
Switch Type None
LNB Power On
Done