Toshiba ZL2 - Manual (Page 39)

39
CONTROLS AND FEATURES
Engl
ish Picture controls
Most of the picture controls and functions are
available in both digital and analogue modes.
PLEASE NOTE: Features not available will be grayed
out.
This television offers the choice of personalising the picture style.
AutoView, Dynamic, Standard, Hollywood Night,
Hollywood Day, Hollywood Pro, Store, Game and PC are
preset options and affect many features/settings within the
television.
NOTE:
• Because the AutoView mode automatically adjusts picture
settings based on ambient light conditions and input signal
content, the Auto Brightness Sensor and Expert Mode
menus are grayed out when it is selected.
• Store mode is only available when Location is set to Store.
• Game mode is available in external input mode (other than
aerial input). When you select Game mode, suitable
widescreen formats will be selected.
• PC mode is available in RGB/PC input mode or HDMI input
mode.
a
Press MENU / C c to highlight Setup icon.
b
Press B / C c to highlight Picture icon and press OK
to display Picture menu.
c
Press B or b to select Picture Mode.
d
Press C or c to select the picture mode you prefer
and press OK.
NOTE:
• The picture mode you select affects the current input only.
You can select a different picture mode for each input.
• During 3D display or 2D display of 3D contents, delay of an
image may become large and may not be suitable for a
game.
You can customize current picture mode settings as desired. For
example, while selecting “Dynamic”, if you change the following
items, such as Backlight, Contrast, Brightness, Colour, Tint,
Sharpness and the Advanced Picture Settings items, your
new settings are saved for “Dynamic” picture mode.
a
In the Picture menu press B or b to select either
Backlight, Contrast, Brightness, Colour, Tint or
Sharpness and press OK.
b
Press C or c to adjust the settings.
This feature resets all picture settings to the factory settings
except Picture Mode.
a
In the Picture menu, press
B
or
b
to select Reset and
press OK.
b
A confirmation message will appear. Press
C
or
c
to
select Yes and press OK.
When ColourMaster is set to On, it allows the ‘Base Colour
Adjustment’ feature to become available.
a
In the Picture menu, press
B
or
b
to select
Advanced Picture Settings and press OK.
b
Press
B
or
b
to select ColourMaster.
c
Press C or c to select On or Off and press OK.
Picture Mode
Picture
Picture Mode
Reset
Backlight
Colour
Tint
Sharpness
100
100
0
0
0
0
Dynamic
Contrast
Brightness
Picture preferences
Reset
ColourMaster
Advanced Picture Settings
ColourMaster
Base Colour Adjustment
Colour Temperature 10
Off
Middle
Auto Brightness Sensor Settings
LED Backlight Control
Black/White Level
Static Gamma
Noise Reduction
10
0