Advanced network setup, Engl ish – Toshiba ZL2 User Manual
Page 49
49
CONTROLS AND FEATURES
Engl
ish
Wireless Information
The settings configured in Wireless Setup can be confirmed.
a
Press QUICK to open the Quick Menu.
b
Press
B
or
b
to select Wireless Information and
press OK.
c
When the Network Type is Wireless, a Wireless
Information window will appear.
NOTE: Press the RED button to scan for all APs.
NOTE: Even if an AP for IEEE 802.11n is used when Encryption
is set to WEP or TKIP, the Speed value might be low. It is
recommended that Encryption be changed to AES (see
“Manual Setup” on page 48).
Notes on wireless LAN environment:
• The function of all IEEE802.11 is not supported.
• The ad-hoc mode is not supported.
• It is recommended to use IEEE 802.11a or IEEE 802.11n on
5 GHz for audio and SD video streaming.
• It is recommended to use IEEE 802.11n on 5 GHz for HD
video streaming.
• It is recommended that the encoding rate for streaming
video content is 20 Mbps or less.
• It is not recommended to use 2.4 GHz for audio and video
streaming.
• Content playback may be interrupted by various
surrounding interference.
NOTE:
• When the DHCP function of the router connected with this
TV is On, you can set Auto Setup to On or Off.
(This should usually be set to On.)
• When the DHCP function of the router is Off, set Auto Setup
to Off, and set the IP Address manually.
IP Address Setup
Auto Setup:
a
In the Preferences menu, press
B
or
b
to select
Network Setup and press OK.
b
Press
B
or
b
to select Advanced Network Setup
and press OK.
c
Press
B
or
b
to select IP Address Setup and press
OK.
Item
Description
Status
Connected is displayed when the TV is
connected with the AP.
Disconnected is displayed when the TV is
not connected with the AP.
Signal
Connection signal strength with AP
(STRONG/MEDIUM/WEAK)
Speed
Link with AP
Mode
Working mode (11a, 11b, 11g, 11n)
Channel
Channel in use (1-165)
Network Name
SSID set
Authentication
Authentication set
Encryption
Encryption set
Security Key
Security Key set
AP MAC
Address
The AP’s MAC address is displayed when
the TV is connected with the AP.
TV MAC
Address
The MAC address of the TV is displayed.
DHCP
Enabled is displayed when using DHCP.
Disabled is displayed when not using
DHCP.
IP Address
The TV’s IP address
Subnet Mask
Value of the Subnet Mask
Default
Gateway
Address of the Default GATEWAY
DNS
Address of the DNS
Quick Menu
50
Picture Size
Picture Mode
AutoView
Super Live
More Information
Personal Mode
3D Viewing Position Test
3D Settings
Sleep Timer
Channel Options
TV Speakers
Headphone Level
REGZA-LINK Device Control
Recording Information
Wireless Information
Speakers
00:00
Advanced Network Setup
Network Type
Wired
Advanced Network Setup
Network Setup
Wireless Setup
Network Connection Test
IP Address Setup
Wired
MAC Address
DNS Setup
Advanced Network Setup