Toshiba ZL2 - Manual (Page 17)

17
Engl
ish
SETTING UP YOUR TV
Startup Application
Before switching on the television, set your
decoder and media recorder, if applicable, to
Standby. To set up the television, use the buttons
on the remote control as detailed on page 8.
a
Press the 1 button. The Menu Language screen will
appear. This screen will appear the first time that the
television is switched on and each time Reset TV is
selected.
b
Press B b C c to select the menu language and
press OK.
c
Highlight Country and press C or c to select. The
television is now set to tune the stations for your
country.
NOTE:
• The following display menus will differ slightly
according to the country you selected.
• If there is not a country that you want to select in the
list, select Others.
d
Press OK, and the Location screen will appear.
e
Press
C
or
c
to select Home or Store. For normal
home use, select Home.
Press OK, and if your country supports the USB
Recorder function, the USB 2 port Setup screen will
appear.
f
Press OK, and the TV Mounting screen will appear.
Press
C or c to select Stand or Wall.
g
Press OK, and the AutoView screen will appear. Press
C or c to select Yes or No.
h
Press OK. If the Ant/Cable/Satellite screen appears,
press
B
or
b
to select Antenna, Cable or Satellite
and press OK to check ( ).
If DVB-C is not supported in your area, Cable will not
be displayed.
• When you select Antenna or Cable, follow steps 9
to 12.
• When you select Satellite, skip to step 13.
• When you select Antenna (or Cable) and Satellite,
the Satellite Settings startup screen will appear
automatically after completing the Antenna (or
Cable) scan and pressing OK.
i
Select Next and press OK. The Auto Tuning start up
screen will appear with the option to select between
DTV and ATV, DTV or ATV if available. Use
C
or
c
to
select the appropriate mode.
j
Press
B
or
b
to highlight Start Scan and press OK.
The television will start to search for available DTV
and/or ATV channels. The progress bar will indicate
the scan status.
You must allow the television to complete the
search.
When the search is complete, the television will
automatically select position one.
The Auto Tuning screen will display the total number
of services found.
NOTE: If there are multiple channels with the same
channel number, a confirmation window will appear.
Press
C
or
c
to select the one you prefer.
Quick Setup
Quick Setup
Country English
Primary Subtitle Language
English
English
English
English
Secondary Subtitle Language
Primary Audio Language
Secondary Audio Language
Location
Home
To use the TV for displaying in a store showroom, please
select [Store]. [Home] mode is recommended for normal
use.
TV Mounting
Stand
If you are mounting the TV on a wall please select [Wall].
[Stand] is recommended for other uses.
This setting may be modified later under Sound Navi in the
Sound menu.
AutoView
No
AutoView mode automatically adjusts picture settings
to suit ambient light conditions.
Do you wish to enable AutoView mode?
Ant/Cable/Satellite
Satellite
Cable
Next
Antenna
Auto Tuning
Progress Found
ATV Tune Waiting...
Channel: C7
DTV Tune 3% 2