Toshiba ZL2 - Manual (Page 24)

24
SETTING UP YOUR TV
En
glis
h
DTV Manual Tuning
NOTE: The content of this menu varies depending on the DTV
input (Antenna, Cable, or Satellite) that is currently selected.
This feature is available for service engineers or can be used for
direct channel entry if the multiplex channel is known.
a
Select DTV Manual Tuning from the System Setup
menu and press OK.
b
Enter the multiplex number using the number
buttons or use
C or c to adjust the number up or
down.
c
Highlight Start Scan and press OK. The television will
automatically search for that multiplex.
When the multiplex is found, any channels that are
not currently in the channel list will be added and the
channel information at the top of the screen will be
updated.
d
Repeat as necessary. Press EXIT to finish.
When Ant/Cable/Satellite is set to Cable, DTV Manual
Tuning items are as follows:
Frequency – input a specific frequency to be scanned
Modulation – choose from one of five QAM modulation
options
Symbol Rate – input a specific baud rate (KS/s) to be used for
the manual scan
Highlight Start Scan and press OK.
When Ant/Cable/Satellite is set to Satellite, DTV Manual
Tuning items are as follows:
Press
B
or
b
to highlight an item (Satellite, Transponder,
Frequency, Symbol Rate, Polarisation or Search Option)
and press
C
or
c
to select the required option.
Highlight Start Scan and press OK.
Manual Tuning
DTV Manual Tuning
WEAK
Signal Strength
Quality
Channel
GOOD
Start Scan
STRONG AVERAGE
13
Pos. New Type Name
ABC ONE
0 New Channels - Total 6
ABC TWO
ABC THREE
ABC NEWS 24
DTV Manual Tuning
2
1
7
40
ABCi 51
Manual Tuning for DVB-C
Manual Tuning for DVB-S
DTV Manual Tuning - Satellite
WEAK
Signal Strength
Quality
Satellite
POOR
Start Scan
STRONG AVERAGE
ASTRA 28.2°E
Transponder 1/83
Frequency 10714 MHz
Symbol Rate 22000 KS/s
Polarisation H
Search Option Free to Air