Toshiba Dynadock Wireless U - Manual (Page 51)

51 Using the dynadock™ and Adjusting Settings
Adjusting audio settings
If the icon is not visible in your System tray/Notification Area, make
sure the dynadock™ is connected and docked, and then click the
Show Hidden Icons button [
], if necessary, to display hidden
icons.
2 Select Select Sound Device… from the menu.
3 On the Playback tab of the dialog box, select one of the
following:
❖
To use the dynadock's Headphone/Speakers/Line out jack,
select USB Multi-Channel Audio Device.
❖
To use the docked computer's Headphone/Speakers/Line
out jack, select a different playback device (other than
USB Multi-Channel Audio Device).
4 Click Set Default.
5 Click OK.
6 Connect your audio playback device to the jack you enabled in
step 3.
You may need to restart your media player for the audio changes to
take effect.
Configuring audio recording ports (Microphone)
1 Click the TOSHIBA dynadock Utility icon in the System
tray/Notification Area of your Windows
® desktop.
(Sample Image) TOSHIBA dynadock Utility icon
If the icon is not visible in your System tray/Notification Area, make
sure the dynadock™ is connected and docked, and then click the
Show Hidden Icons button [
], if necessary, to display hidden
icons.
2 Select Select Sound Device… from the menu.
3 On the Recording tab of the dialog box, select one of the
following:
❖
To use the dynadock's Microphone jack, select USB
Multi-Channel Audio Device.
NOTE
NOTE
NOTE