Toshiba Dynadock Wireless U - Manual (Page 49)

49 Using the dynadock™ and Adjusting Settings
Adjusting video settings
Supported display modes
Three components make up the display mode: resolution, color
depth, and refresh rate. These components are defined as follows.
❖
Resolution: In common usage, the resolution is the number of
pixels displayed on the screen horizontally and vertically.
❖
Color Depth: The number of different colors that can be
shown on the screen at the same time.
❖
Refresh rate: The speed at which the entire screen is
rescanned. Higher frequencies reduce flicker.
The dynadock™ supports the following display modes:
*Available in 16-bit color mode only.
Resolution Refresh Rates (Hz) Color Depth
640 x 480 60, 67, 72, 75, 85
All modes available in both
16-bit and 32-bit color except
modes marked with an
asterisk(*)
720 x 400 70, 85, 88
720 x 480 50, 60
768 x 576 50, 60
800 x 480 60
800 x 600 56, 60, 72, 75, 85
832 x 624 75
848 x 480 60
1024 x 600 60
1024 x 768 60, 70, 75, 85
1152 x 864 75
1152 x 870 75
1280 x 720 50, 60
1280 x 768 60, 75, 85
1280 x 960 60, 85
1280 x 1024 60, 75, 85*
1280 x 800 60
1360 x 768 60
1366 x 768 50, 60
1368 x 768 60
1400 x 1050 60, 75, 85
1440 x 900 60
1600 x 1200 60
1680 x 1050 60