Pioneer CNDV-50MT - Manual (Page 63)

61
A
ppe
n
d
ix
About AV Head Units/Displays
to be connected
You need an AV head Unit or Display with a touch
panel feature to use this software. If a display that
does not have a touch panel feature is
connected, the software will not function
properly. This includes Pioneer displays that do
not have touch panel features. Make sure to use
a display suitable for the system. For details,
consult a dealer or product catalogue.
Group 1 – AV Head Unit
The type of the unit that can be a control master
with the following features (e.g. AVH-P7500DVD
II,
AVH-P5700DVD, AVH-P6600DVD, AVH-
P6500DVD, and AVH-P7500DVD):
• a source unit can be connected to it directly,
and
• a built-in amplifier and display are equipped.
Group 2 – Display Type AVD
The type of the unit that has a built-in amplifier
only for the built-in speaker(s) and cannot be a
control master because other unit cannot be
connected to it (e.g. AVD-W6210).
Group 3 – AV system display
The type of the unit that has no amplifier and
cannot be a control master because other unit
cannot be connected to it (e.g. AVX-7600).
Features available to each Group
*1: The AV Head Unit or Display must be set to Mute or ATT while the Guidance is being performed by
the Navigation System.
*2: Available when the GUIDE ON lead of the Navigation System is connected to the Pioneer Head Unit.
*3: Recognizable commands are Source On, Source Off, Display AV, Display Navi, Navigation Audio,
Video In, Next page, Previous page, Repeat, and Back.
Group 1 Group 2 Group 3
“Touch Panel Operation when using NAVI
source” (➞ Page 63)
X – X
Map Display
• AV Guide Mode (➞ Page 50)
X – X
• Arrow in AV (➞ Page 50) X – X
Mute Setting
• Voice Recognition (➞ Page 51)
X *1 X *1 X *2
• Voice Guidance (➞ Page 51) X *1 X *1 X *2
“Common commands for Audio operations”
(➞ Page 55)
X – – *3
MAN-CNDV-50MTP-EN.book Page 61 Friday, April 29, 2005 10:33 AM