Pioneer CNDV-50MT - Manual (Page 62)

60
App
en
d
ix
When the installation is complete, the
opening display appears.
6
Press the NAVI/AV button to change the
navigation screen.
Some time is needed until navigation is ready.
7
Check the details of the cautionary
message and touch “OK”.
8
To set the time difference, touch “+” or
“–”.
The time difference between the time
originally set in the navigation system (Central
European Time) and the current location of
your vehicle is shown. If necessary, adjust the
time difference. Touching “+” or “–” changes
the time difference display in one-hour
increments. The time difference can be set
from +3 to –3 hours.
9
If necessary, set to summer time.
Summer time is off by default. Touch
“Summer Time” to change the time if
summer time is in effect. This turns the
display below Summer Time “On”.
10
To complete the setting, touch “Back”.
The map of your surroundings appears.
This completes the setup of your Navigation
System. Chapter 1 explains the basic operation of
your Navigation System.
➲ To change the language and time later ➞
Page 51
Combining and Using Pioneer
AV Equipment
To Ensure Safe Driving
• To avoid the risk of an accident and the
potential violation of applicable laws, the
navigation system is not for use with a
video screen that is visible to the driver.
• In some countries or states the viewing of
images on a display inside a vehicle even
by persons other than the driver may be
illegal. Where such regulations apply, they
must be obeyed.
Time difference
MAN-CNDV-50MTP-EN.book Page 60 Friday, April 29, 2005 10:33 AM