Pioneer CNDV-50MT - Manual (Page 17)

15
Ch
ap
te
r
1
Ba
sic Op
er
at
io
n
❒ If there are 0 or more than one locations
corresponding to the entered house
number, a list of house number ranges
appears. To start the route calculation,
touch the range within the list you wish to
specify as the destination. You can also
see the destination on the map by
touching the
to the right of the list.
➲ Searching the destination by map ➞
Page 21
10
Route calculation starts automatically.
Route calculation starts. When the route
calculation is completed, the map of your
surroundings appears. (The route is displayed
in highlighted colour.)
❒
If you press the NAVI (or POS) button
during route calculation, the calculation is
cancelled and the map display appears.
❒ When performing a destination search
with the route already set, select whether
to regard the specified area as your
destination and search for a new route, or
search for a route via that area.
➲ Adding way points to the route ➞ Page 31
➲ Once searched for, a location is
automatically stored in the “Destination
History” ➞ Page 36
11
Drive in accordance with the screen and
voice information.
Your Navigation System gives you the
following information with the timing adjusted
to the speed of your vehicle:
• Distance to the next turning point
• Direction of travel
• Road number of the motorway
• Way point (If this is set)
• Your destination
➲
How to view the screen ➞ Page 18
➲ Searching for another route ➞ Page 30
➲ Cancelling route guidance ➞ Page 31
❒ Touching the or pressing the remote
control’s GUIDE button allows you to hear the
information again.
❒ If you deviate from the route with the
Guidance set to St.List Mode or Mixed
Mode and enter a street not recorded on the
disc, the screen changes to Map Mode.
When you return to the route, the screen
returns to the original mode and resumes
route guidance.
❒ If you stop at a petrol station or a restaurant
during the route guidance, your Navigation
System remembers your destination and
route Information. When you start the engine
and get back on the road, the route guidance
resumes.
❒ If a traffic jam or closure occurs on the set
route ahead, traffic information will appear on
the screen and voice information will be
provided. At that time, select whether to
recalculate for a new route.
➲ Traffic jam information ➞ Page 41
Buttons you can use
The status of the buttons appearing on the
screen is indicated by their colour.
Depending on the function the navigation is
performing, you can touch some buttons, while
other buttons are not available.
Blue touch key:
The button is operable.
Dark grey touch key:
The function is not available (e.g., operation is
prohibited while driving).
How to Use Menu Screens
The basic operation of the navigation is
performed by using menus.
There are two types of menu: the “Main menu”
and the “Shortcut menu”.
Main menu
You use this menu for basic operation of your
Navigation System.
MAN-CNDV-50MTP-EN.book Page 15 Friday, April 29, 2005 10:33 AM