Barco R9001960 - Manual (Page 88)

9. Service mode
9.13 Uniformity
Changing these settings may seriously affect the performance of the projector.
Start Up
1. Push the cursor key
↑
or
↓
to highlight Uniformity. (menu 9-25)
2. Press ENTER to select.
The following warning will be displayed : (menu 9-26)
Uniformity is reserved to qualified service personnel. If you are not qualified, press EXIT to cancel the panel adjustments.
SERVICE
BARCO LOGO
PANEL ADJUSTMENTS
UNIFORMITY
RESET INPUT BALANCE
I2C DIAGNOSIS
Select with
↑
or
↓
then
to return.
Menu 9-25
WARNING
UNIFORMITY
is reserved to
qualified
service personnel
to accept
to return.
Menu 9-26
9.14 Preset Input Balance
Changing these settings may seriously affect the performance of the projector.
Start Up
1. Push the cursor key
↑
or
↓
to highlight Preset Input Balance. (menu 9-27)
2. Press ENTER to select.
The following warning will be displayed : (menu 9-28)
Preset input balance is reserved to qualified service personnel. If you are not qualified, press EXIT to cancel the panel adjust-
ments.
SERVICE
BARCO LOGO
PANEL ADJUSTMENTS
UNIFORMITY
RESET INPUT BALANCE
I2C DIAGNOSIS
Select with ↑ or ↓
then
to return.
Menu 9-27
WARNING
PRESET INPUT BALANCE
is reserved to
qualified
service personnel
to accept
to return.
Menu 9-28
9.15 I2C Diagnoses
What can be done?
This menu gives an overview of the correct working of the I²C controlled IC’s.
84 R5976182 BARCOREALITY 6500 30012001