Barco R9001960 - Manual (Page 57)

7. Random Access
What can be done ?
The possibility is offered to decode the NTSC video signals via the default American IRE standard or via the European EBU standard.
Decoding a NTSC signal using the European EBU standard may result in a greenish tint.
How to change the decoding setting ?
1. Push the cursor key ↑ or ↓ to highlight Decoding. (menu 7-29)
2. Press ENTER to toggle between EBU or IRE.
3. Press EXIT to return.
PICTURE TUNING
CTI [ON]
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH
NOISE REDUCTION
INPUT BALANCE
Select with ↑ or ↓
then
to return.
Menu 7-29
7.3.6 Dynamic Color Depth
Purpose
Increases color contrast for all video and data sources.
Changing the Dynamic Color depth value.
1. Push the cursor key ↑ or ↓ to highlight Dynamic Color Depth. (menu 7-30)
2. Press ENTER to select.
3. Change the value by pushing the cursor key ← or → until the desired dark color saturation is reached.
4. Press EXIT to return the Picture Tuning menu.
PICTURE TUNING
CTI [ON]
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH
NOISE REDUCTION
INPUT BALANCE
Select with ↑ or ↓
then
to return.
Menu 7-30
7.3.7 Noise Reduction
Purpose
Reduces noise and pixel jitter in all video and data sources
R5976182 BARCOREALITY 6500 30012001 53