Barco R9001960 - Manual (Page 82)

9. Service mode
Start Up
1. Push the cursor key
↑
or
↓
to highlight Identification. (menu 9-4)
2. Press ENTER to display the Identification screen. (menu 9-5)
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
LAMP DIMMING
MORE...
Select with ↑ or ↓
then
to return.
Menu 9-4
BARCO
REALITY 6500
Proj. address: 001
Soft. version: 3.0
Network module: yes
Config: front/ceiling
Bautrate PC: 9600
text: on
Serial no:1010200
Run time: 100 h
Select with ↑ or ↓
then
to return.
Menu 9-5
9.4 Change Password
How to enable or disable the password function ?
This item is password protected when the password strap is installed.
The password function is enabled when the password strap on the controller module is installed. Consult an authorised Barco
service technician to change the strap position.
How to change the password ?
1. Push the cursor key ↑ or ↓ to highlight Change Password. (menu 9-6)
2. Press ENTER to display the Change Password menu. (menu 9-7)
4 ’_’ characters are displayed. A new pasword can be entered with the digit keys of the RCU or local keypad. Everytime a digit
is entered, a ’X’ appears on the screen. The confirm new pasword is still grayed out.
3. Press ENTER, the confirm new password item becomes active. Press EXIT if no changes have to be made.
4. 4 ’x’ characters are displayed in the confirm new pasword area. Key in your password again with the digit keys of the RCU or
the local keypad.
5. Press ENTER.
If the confirm new password entery is the same as the entered new password, the password is changed.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
LAMP DIMMING
MORE...
Select with ↑ or ↓
then
to return.
Menu 9-6
CHANGE PASSWORD
Enter new password
xxxx
Confirm new password
xxxx
Select with ↑ or ↓
then
to return.
Menu 9-7
78 R5976182 BARCOREALITY 6500 30012001