Konica Minolta Darwin VDP Software User Manual
Page 46

Page 46 of 92
T EC - I T B a r c o d e So f t w a re R e f e re n c e
8
Reserved for future use
9
Is used only to signify a variable content shipment. The 9 indicates to the scanner that a mandatory
variable content add-on symbol follows the primary symbol.
Table 16: Shipping Container Symbol Packaging Indicator
6.1.82 USD-4
This symbology is identical with
Codabar 2 Widths
and is also known as Code 2 of 7 and as NW-7.
6.1.83 USPS OneCode 4-State Customer Barcode
Symbology number:
85
Valid characters:
“0”..”9”, 20 digits + 0, 5, 9, or 11-digit ZIP
Code.
Quiet zone:
vertical: 1/25 inch
horizontal: 1/8 inch
Module width:
--
Standard print ratio:
1:1
Ratio format:
1B:1S
Default check digit:
Automatic (symbology specific).
Symbol size:
Up to 31 digits
This symbology is also known as
OneCode 4CB
USPS 4CB
4-CB
4-State Customer Barcode
USPS OneCode Solution Barcode.
The following data is encoded:
Barcode ID (1st digit: 0-9; 2nd digit: 0-4)
Special services (range: 000-999)
Customer ID (range: 000000-999999)
Sequence number (range: 000000000-999999999)
Delivery point ZIP code (0, 5, 9, or 11-digit ZIP code)
6.1.84 USPS Postnet 5
Symbology number:
40
Valid characters:
“0”..”9”, 5 digits + 1 check digit
Quiet zone:
vertical: 1/25 inch
horizontal: 1/8 inch
Module width:
--
Standard print ratio:
1:1
Ratio format:
1B:1S
Default check digit:
POSTNET (eCDPostNet)
Symbol size:
5 digits, 1 check digit
123455
This code is used by the United States Postal Services for mass-mailing applications. Encoded are
a 5 digit ZIP-code. The check digit is calculated automatically. It cannot be specified in the input
data.
The barcode height should be adjusted to 3.2 mms; the module width to 0.423 mms; usually no
plain text is displayed.