Konica Minolta Darwin VDP Software User Manual
Page 31

Page 31 of 92
T EC - I T B a r c o d e So f t w a re R e f e re n c e
6.1.35 EAN-13
Symbology number:
13
Valid characters:
“0”..”9”, 12 digits + 1 check digit
Quiet zone:
left: 11X, right: 7X
Module width:
X=0.33mm
Standard print ratio:
1:2:3:4:1:2:3:4
Ratio format:
1B:2B:3B:4B:1S:2S:3S:4S
Default check digit:
EAN-13 (eCDEAN13)
Possible check digits:
User supplied
Symbol size:
Standardized symbol sizes. Se
This code is reserved for the European Article Numbering
identifying articles or products uniquely. Encoded are a 2-digit country code, 5-digits manufacturer
code and a 5 digits products code. JAN and IAN are identical to EAN-13.
The check digit is calculated automatically if it not specified in the input data (that is when only 12
digits are used for creating the code).
6.1.36 EAN-13 with 2 Digits Add-On
Symbology number:
14
Valid characters:
“0”..”9”, 14 digits + 1 check digit
Quiet zone:
left: 7-10X, right: 5X
Module width:
X=0.33mm
Standard print ratio:
1:2:3:4:1:2:3:4
Ratio format:
1B:2B:3B:4B:1S:2S:3S:4S
Default check digit:
EAN-13 (eCDEAN13)
Possible check digits:
User supplied
Symbol size:
Standardized symbol sizes. Se
This symbology extends EAN-13 with 2 add-on digits (see also EAN-8 with 2 Digits Add-On). The
check digit will be calculated automatically if it not specified in the input data (e.g.
978020137968612).
6.1.37 EAN-13 with 5 Digits Add-On
Symbology number:
15
Valid characters:
“0”..”9”, 17 digits + 1 check digit
Quiet zone:
left: 7-10X, right: 5X
Module width:
X=0.33mm
Standard print ratio:
1:2:3:4:1:2:3:4
Ratio format:
1B:2B:3B:4B:1S:2S:3S:4S
Default check digit:
EAN-13 (eCDEAN13)
Possible check digits:
User supplied
Symbol size:
Standardized symbol sizes. Se
This symbology extends EAN-13 with 5 add-on digits (see also EAN-8 with 5 Digits Add-On). The
check digit will be calculated automatically if it not specified in the input data (e.g.
978020137968612345).