Konica Minolta Darwin VDP Software User Manual
Page 39

Page 39 of 92
T EC - I T B a r c o d e So f t w a re R e f e re n c e
6.1.57 NVE-18 (Nummer der Versandeinheit)
Symbology number:
75
Valid characters:
“0”..”9”
Check digit method:
Modulo10
Default check digit:
Modulo10
Quiet zone:
left/right: 10X, min. ¼ inch
Module width:
X >= 0.19 mm
Standard print ratio:
1:2:3:4:1:2:3:4
Ratio format:
1B:2B:3B:4B:1S:2S:3S:4S
Default check digit:
Automatic (symbology specific).
Modulo 10 (eCDMod10) and Modulo 103
(eCDEAN128)
Symbol size:
--
(00)123456789012345675
NVE stands for “Nummer der Versandeinheit” (a German term for tracking number). This code uses
an EAN-128 symbology with a prefixed Application Identifier (AI)
00. The AI “00” is inserted automa-
tically and must not be included in the input data. It is similar to SSCC-18.
6.1.58 NW-7
This symbology is identical with
Codabar 2 Widths
and is also known as Code 2 of 7.
The Japanese version of the Codabar 2 Widths barcode is called NW7. Another name for this
symbology is Code 2 of 7
– see section 6.1.8
The following symbols can be encoded in NW7: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, -, $, /, ., +
6.1.59 Pharmacode One-Track
Symbology number:
51
Valid characters:
“0”..”9” or binary
Quiet zone:
left/right: 6 mm
Module width:
2-3 mm
Standard print ratio:
1:3:2:4:2:3
Ratio format:
1B:2B:1C:2C:1S:2S
Default check digit:
None (eCDNone)
Symbol size:
5-10 mm height
111111
This code was invented by Laetus
®
. It is used in pharmaceutical areas. Pharmacode supports
colored bars. The data for the bars/spaces is encoded directly in the property
Text
:
“0” is used for a narrow bar (the width of these bars are enlarged after a color change,
according to ratio 1C)
“1” is used for a wide bar (the width of these bars are enlarged after a color change,
according to ratio 2C)
“b” is used for a narrow bar
“c” is used for a wide bar
When using colored bars, the color is specified by the escape sequence \Crrggbb (where rrggbb is
an RGB value; each letter stands for a hexadecimal digit (0-f); rr stands for the red, gg for the
green, and bb for the blue value part). The sequence \Ce resets the color to default. The barcode
Format
must be set to
D
and
EscapeSequences
must be activated.
The data for the barcode in the example above is as follows (the color escape sequence is not
displayed in the human readable text): 111\C2a3282111.