Konica Minolta Darwin VDP Software User Manual

Page 28

Page 28 of 92

T EC - I T B a r c o d e So f t w a re R e f e re n c e

6.1.25 DAFT Code

Symbology number:

Valid characters:

“D”, “A”, “F”, “T” or “d”, “a”, “f”, “t”

Quiet zone:

left/right: 2 mm

Module width:

Standard print ratio:

1:1

Ratio format:

1B:1S

Default check digit:

None

Symbol size:

DAFT Code is no symbology. It is a technique to generate arbitrary postal codes (like for instance
the Australian Postal Codes or the Royal Mail 4 State code).

Each input character stands for a specific bar type and there are 4 different bar types:



“D” or “d”: Descender



“A” or “a”: Acsender



“F” or “f‟: Full



“T” or “t”: Transmitter

6.1.26 Deutsche Post Identcode

Symbology number:

Valid characters:

“0”..”9”, 11 digits + 1 check digit

Quiet zone:

left/right: 10X, min. ¼ inch

Module width:

Standard print ratio:

1:3:1:3

Ratio format:

1B:2B:1S:2S

Default check digit:

Automatic (symbology specific).
DP Identcode (eCDDPIdent)

Symbol size:

01.234 567.86

This symbology is used by Deutsche Post. The code is basically a Code 2 of 5 interleaved
enhanced with a special check digit calculation.

6.1.27 Deutsche Post Leitcode

Symbology number:

Valid characters:

“0”..”9”, 13 digits + 1 check digit

Quiet zone:

left/right: 10X, min. ¼ inch

Module width:

Standard print ratio:

1:3:1:3

Ratio format:

1B:2B:1S:2S

Default check digit:

Automatic (symbology specific).
DP Leitcode (eCDDPLeit)

Symbol size:

01234.567.86

This symbology is used by Deutsche Post. The code is basically a Code 2 of 5 Interleaved
enhanced with a special check digit calculation. It is used for encoding the ZIP-Code, Street and
number of the shipment.

6.1.28 DOD Logmars

Department of Defense Logmars. Same as Logmars (see section 6.1.55).