beautypg.com

Specifying the lpr settings, Specifying the lpr settings -15 – Konica Minolta bizhub 601 User Manual

Page 82

background image

IC-208

5-15

Installation on Macintosh computers

5

If a different PPD file has already been selected, click the [Setup] button in step 3, and then click the
[Select PPD] button from the window that is already displayed.

A window for specifying options appears.

5

Select options installed on this machine on the "Options Installed 1" and "Options Installed 2" windows.

6

Click the [OK] button.

The "selector" window appears again.

7

Close the "selector" window.

Specifying the LPR settings

Specifying the TCP/IP setting for this machine

Specify the IP address of this machine.

!

Detail

For details on specifying the IP address of this machine, refer to the User’s Guide [Network
Administrator].

LPD setting for this machine

To use LPR printing, enable LPD print in the LPD Setting screen of this machine.

!

Detail

For details on the LPD settings of this machine, refer to the User’s Guide [Network Administrator].

Specifying the TCP/IP setting for the computer

Specify the TCP/IP setting for the Macintosh computer connected to this machine.

1

On the "Apple" menu, select "Control Panel" - "TCP/IP".

2

From the "Connect via" drop-down list, select "Ethernet".

3

Select "Configure" items according to the settings for the network to which the Macintosh computer is
connected, and then specify the IP address and subnet mask.

This manual is related to the following products: