Konica Minolta bizhub 601 - Manual (Page 102)

IC-208 8-12
Print functions of the PCL/PS/XPS drivers for Windows 8
2
Note
"Staple", "Center Staple and Fold", and "Fold" functions are available only if the optional finisher or Z
folding unit is installed.
The "Punch" function is available only when the punch kit or Z folding unit is installed with the optional
finisher.
8.4.4 Cover Mode tab
Output Tray Default, Main Tray, Sub Tray Specifies the tray where to output the printed pages.
The selectable items differ depending on the options
that are installed.
Output Order Face Down, Face Up Specifies output paper to be facing up or facing down.
The printed side is to be facing down when output if
"Face Down" is specified, or facing up if "Face Up" is
specified.
Function name Option Description
Function name Option Description
Front Cover ON/OFF, Blank/Print Attaches a front cover page.
Front Cover Tray Tray1-4, LCT, Bypass Tray Selects the paper tray for the cover.
The selectable items differ depending on the options
that are installed.
Back Cover ON/OFF, Blank/Print Attaches a back cover page.
Back Cover Tray Tray1-4, LCT, Bypass Tray Selects the paper tray for the back cover.
The selectable items differ depending on the options
that are installed.
Front Cover from
Post Inserter ON/OFF Prints the document with a front cover attached from
the post inserter. The cover paper is fed from the se-
lected PI tray.
Back Cover from
Post Inserter ON/OFF Prints the document with a back cover attached from
the post inserter. The cover paper is fed from the se-
lected PI tray.
Per Page Setting ON/OFF Inserts paper between pages and switches the paper
and tray for each page. [Edit List] allows you to create
a list by setting conditions by page.