Konica Minolta bizhub 601 - Manual (Page 225)

IC-208 12-46
Settings on the control panel 12
Buttons for the available settings appear.
4
Touch the button for the desired setting is set.
The capturing of a print job is either allowed or prohibited.
2
Note
For details on capturing a print job, contact your service representative.
12.4.14 Secured Printing Only
Specify whether the printing from the computer should be limited only to the security document. (Default:
[OFF])
Whenever printing is done from the printer driver, the data must be transmitted using the secure printing.
Because this setting requires ID/password for every print job, your job is protected from being intercepted
by a third party.
Yes: Select this option to limit printing only to the secure documents.
No: Select this option not to limit printing to the secure documents.
2
Note
When you print a document on the machine with "Secure Print Only" set to "Yes", specify "Secure Print
Only" on the printer driver so that only the secure print jobs are transmitted.
If a normal print job is sent to the machine where "Secure Print Only" is set to "Yes", the print job is
deleted.
!
Detail
For details on displaying the Administrator Settings screen, refer to "Displaying the Administrator
Settings screen" on page 12-32 .
1
In the Administrator Settings screen, press [0 Security Settings].
2
In the Security Settings screen, press [4 Security Details].
3
Switch the page by pressing [ ↑] or [↓], and then press [Secured Printing Only].