Konica Minolta bizhub 601 - Manual (Page 33)

IC-208 3-3
Easy installation using the installer (Windows) 3
3.2 Easy installation using the installer
3.2.1 Settings of this machine
Specify the IP address of this machine.
2
Note
To allow this machine to be automatically detected when connected to a network, be sure to set the IP
address for this machine before starting installation. For details, refer to the User’s Guide [Network
Administrator].
Depending on the connection method and protocol, change the network settings of this machine.
- Port9100: Enable the RAW port number (9100 at default), in the TCP/IP screen.
- IPP/IPPS: Enable IPP print in the IPP Setting screen.
2
Note
For details on the TCP/IP settings and IPP settings of this machine, refer to the User’s Guide [Network
Administrator].
To use IPPS printing, the certificate must be registered to this machine. For details, refer to the User’s
Guide [Network Administrator].
3.2.2 Installation of the printer driver
!
Detail
If the User Account Control window appears when installing on Windows Vista/Server 2008/7, click the
[Allow] button or the [Continue] button.
1
Insert the Driver CD into the CD-ROM drive of the computer.
– Check that the installer starts up, and then continue with step 2.
– If the installer does not start up, open the printer driver folder on the CD-ROM, double-click
"Setup.exe" for the 32bit editions OS and "Setup64.exe" for the 64bit editions OS, and then
proceed to Step 3.
2
Click the "Printer Install" button.
The installer of the printer driver starts.
3
If you agree with all terms and conditions of the license agreement, click the [AGREE] button.
– If not, the software cannot be installed.
– In the language display box, you can change the language used with the installer as required.