Konica Minolta bizhub 601 - Manual (Page 75)

IC-208 5-8
Installation on Macintosh computers 5
Specifying the TCP/IP setting for the computer
Specify the TCP/IP setting for the Macintosh computer connected to this machine.
1
On the "Apple" menu, select "System Preferences".
2
Click the "Network" icon.
3
The Ethernet setting window appears.
– For OS X 10.4, select "Built-in Ethernet", and then click the [Configure] button.
– For OS X 10.5/10.6, select "Ethernet", and then click the [Advanced] button.
4
Click the TCP/IP tab.
5
Select "Configure" items according to the settings for the network to which the Macintosh computer is
connected, and then specify the IP address and subnet mask.
6
Click the close button at the upper left corner of the dialog box.
– When the "This service has unsaved changes" message appears, click the [Apply] button.
Adding a printer
1
On the "Apple" menu, select "System Preferences".
2
Click the "Print & Fax" icon.
3
Click [+] in the Print & Fax window.
– If available printers have already been set up, the Add Printer dialog box does not appear.
4
Click the [IP] button or the [IP Printer] button.
5
From "Protocol", select "IPP".
6
In "Address", enter the IP address of this machine. In "Queue", enter "ipp".
– After the printer driver is selected automatically, go to Step 8.
– If an incorrect printer driver is selected, go to Step 7.
7
Select the desired printer driver manually.
– When OS X 10.4 is used, select "KONICA MINOLTA" in "Print Using", and then select the printer
driver of the desired model name from the list.
– When OS X 10.5 is used, select the "Select a driver to use" from the "Print Using", and then select
the printer driver of the desired model name from the list.
– When OS X 10.6 is used, select "Select printer software" from the "Print Using", and then select the
printer driver of the desired model name from the list that is displayed in another window.