Konica Minolta bizhub 601 - Manual (Page 48)

IC-208 4-13
Manual installation using the Add Printer wizard 4
5
Click "Add a network, wireless or Bluetooth printer".
– If the printer is not detected, turn off this machine, then on again.
– When turning off the power, then on again, wait at least 10 seconds before turning it on again.
Otherwise, this machine may not function properly.
The connected printers are detected.
6
Select this machine from the list, and then click the [Next] button.
– When using the LPR/Port9100 protocol, select the printer having its IP address.
– When using an SMB connection, select the printer having its "\\NetBIOS name\print service name".
– When using the SMB connection, click [Next], and then click [OK] in the "Connect to Printer"
window that appears.
– It may take some time to finish searching the entire list of printers.
7
Click the [Have Disk] button.
8
Click the [Browse] button.
9
Specify the desired folder on the CD-ROM that contains the printer driver, and then click the [Open]
button.
– Select the specified folder according to the printer driver to be used, the operating system, and the
language.
Printer drivers that can be selected:
PCL driver, PS driver, XPS driver, fax driver
– For details of the built-in CD-ROM construction, see "Contents of CD-ROM" on page 1-9 .
– For details on fax drivers, refer to the User’s Guide [Fax Driver Operations].