4 local connection, Local connection -30, S 2000 – Konica Minolta bizhub 601 User Manual
Page 65: Local connec
IC-208
4-30
Manual installation using the Add Printer wizard
4
12
Click the [OK] button.
The "Printer" list appears.
13
Click the [OK] button.
14
Follow the on-screen instructions.
–
When the "Digital Signature" dialog box appears, click the [Yes] button.
15
Click the [Finish] button.
16
When the installation is completed, make sure that the icon of the installed printer appears in the
Printers and Faxes window.
17
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
Once the settings for the printer have been specified, you can use the printer in the same way as a default
local printer. Also, if you set up the printer for sharing in Windows, it can be used as a network printer by other
Windows computers over the network.
4.3.4
Local connection
When this machine is connected via a USB port, the printer driver can be installed with plug-and-play.
2
Note
When a connection is made with the USB port, the local interface kit is required.
1
Connect this machine to a computer using a USB cable, and then start up the computer.
–
Do not disconnect or connect the cable while the computer is starting up.
2
Insert the Driver CD into the CD-ROM drive of the computer.
3
Turn on the main power of this machine.
The Found New Hardware Wizard dialog box appears.
–
If the Found New Hardware Wizard does not start up, turn off this machine, then on again.
–
When turning off the power, then on again, wait at least 10 seconds before turning it on again.
Otherwise, this machine may not function properly.
4
Select "Search for a suitable driver for my device (recommended)", and then click the [Next] button.
5
Select "Specify location", and then click the [Next] button.
6
Specify the desired folder on the CD-ROM that contains the printer driver, and then click the [Open]
button.
–
Select the specified folder according to the printer driver to be used, the operating system, and the
language.
Printer drivers that can be selected:
PCL driver, PS driver, fax driver
–
For details of the built-in CD-ROM construction, see
"Contents of CD-ROM" on page 1-9
.
–
For details on fax drivers, refer to the User’s Guide [Fax Driver Operations].
7
Click the [OK] button, and then follow the on-screen instructions.
–
When the "Digital Signature" dialog box appears, click the [Yes] button.
8
Click the [Finish] button.
9
When the installation is completed, make sure that the icon of the installed printer appears in the
Printers and Faxes window.
10
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.