Konica Minolta bizhub 601 - Manual (Page 101)

IC-208 8-11
Print functions of the PCL/PS/XPS drivers for Windows 8
2
Note
"Combination" provides options "2 Ч 2, 3 Ч 3, 4 Ч 4" to print a sheet of document into multiple sheets
of paper. The function is only for the PCL driver.
The "Skip Blank Pages" function is only for the PCL driver and XPS driver.
The positions of binding margins vary according to the "Binding Position" setting.
8.4.3 Finish tab
[Binding Margin
Settings] Shift Mode Selects how to process the image to prepare the bind-
ing margin.
Front Side/Back Side Specifies the binding margin values. For 2-sided print-
ing, clearing the "Same Value for Front and Back
Sides" check box allows you to set different values
between the front and back sides.
Units Selects the measurement unit that specifies the size.
Image Shift ON/OFF Prints by shifting the entire print image. Click the [Im-
age Shift Settings] button to specify the image shift
values.
[Image Shift Set-
tings] Units Selects the measurement unit that specifies the size.
Front Side/Back Side Specifies the shift direction and values. For 2-sided
printing, clearing the "Same Value for Front and Back
Sides" check box allows you to set different values
between the front and back sides.
Function name Option Description
Function name Option Description
Staple ON/OFF Specifies stapling.
From the drop-down list, specify the number of sta-
ples and the stapling position.
Center Staple and
Fold ON/OFF Specifies to saddle stitch a printed document.
Punch ON/OFF Specifies hole punching.
From the drop-down list, specify the number of
punches and the position.
Fold ON/OFF Specifies folding.
The selectable items differ depending on the installed
options.