Konica Minolta bizhub C3350 - Manual (Page 30)

[Applied Functions] 1-24
1.5 Available operations in Administrator mode 1
[Authentication Device Settings] - [General Settings]
To display: Administrator mode - [Security] - [Authentication Device Settings] - [General Settings]
(This menu is displayed when the optional Authentication Unit AU-201 is installed.)
Configure the setting relevant to IC card authentication.
Tips
If this menu is changed, the card information saved on this machine is deleted.
[PKI Settings] - [Device Certificate]
To display: Administrator mode - [Security] - [PKI Settings] - [Device Certificate]
You can self-create a new certificate of this machine or install a certificate issued by the Certificate Authority
(CA).
For details, refer to page 2-34.
[PKI Settings] - [SSL/TLS Settings]
To display: Administrator mode - [Security] - [PKI Settings] - [SSL/TLS Settings]
Select whether or not to enable SSL communication. Also select the SSL encryption strength.
[Public User] Select the processing method to perform when a public user job is received.
•
[Print Immediately]: Prints the job without saving it on the HDD.
• [Save]: Saves to the HDD.
[Save] is specified by default.
[Default Operation Se-
lection] Select the default value for the operation that is performed after the authenti-
cation process is carried out on the login screen.
•
[Begin Printing]: Prints an ID & Print job without logging in to this machine
if there is an ID & Print job. If there is no ID & Print job, log in to this machine.
• [Access Basic Screen]: Log in to this machine. The ID & Print job is not ex-
ecuted.
[Begin Printing] is specified by default.
Item Description
Item Description
[Authentication Type] Select how to log in to this machine.
•
[Card Authentication]: Allows the user to log in by simply placing the IC
card.
• [Card Authentication+Password]: Allows the user to log in by placing the IC
card and entering the password.
[None] is specified by default.
Item Description
[SSL/TLS] Select whether or not to enable SSL communication.
[Disable] is specified by default.
[Encryption Strength] Select the SSL encryption strength. Select the appropriate strength to suit your
environment.
[AES-256, 3DES, RC4-128] is specified by default.
[SSL/TLS Version] Select the version of the SSL to be used. Select the appropriate version to suit
your environment.