Konica Minolta bizhub C3350 - Manual (Page 137)

5.2 Preparation for printing 5
[Applied Functions] 5-3
5.2 Preparation for printing
5.2.1 Adding the printer
0 Before installing the printer driver, exit all application software.
0 Root authority is required to add a printer.
1
Connect this machine to the computer via USB or network.
% If a dialog box to specify the printer driver appears when you use USB to connect this machine, click
[Cancel] to close the dialog box.
2
Insert the printer driver CD-ROM into the CD-ROM drive of the computer.
3
From the [System] menu, select [Administration] - [Printing].
4
Click [New Printer].
5
Enter the [Printer name], [Description], and [Location], and click [Forward].
The printer is automatically detected in the device column.
6
Select the connection method.
% When USB is used, select "Name of this machine USB #1" in the device column.
% When connecting via network, select this machine that was automatically detected in the device
column.
% If this machine is not displayed in the device column, select the port according to the connection
method.
[AppSocket/HP jetDirect], [Internet Printing Protocol (ipp)], or [LPD/LPR Host or Printer]
7
Click [Forward].
8
Select [Provide PPD file].
9
Click the folder icon, and specify the PPD file on the CD-ROM.
% You can obtain the PPD file of the various languages in the "Drivers/LinuxPPD/" folder.
Select the PPD file suitable for your language.
10
Click [Forward].
11
Click [Apply].
12
Remove the CD-ROM from the CD-ROM drive.
Installation of the printer driver is then completed.
5.2.2 Manually adding the printer driver
Manually installing the PPD file
0 Before installing the printer driver, exit all application software.
0 Root authority is required to install the printer driver.
1
Insert the printer driver CD-ROM into the CD-ROM drive of the computer.
2
From the CD-ROM, copy the PPD file to "/usr/share/cups/model".
% You can obtain the PPD file of the various languages in the "Drivers/LinuxPPD/" folder.
Select the PPD file suitable for your language.
3
From the main menu, select [Application] - [Accessories] - [Terminal].